TV channels and frequencies in Hobart
Every transmitter serving the Hobart reception area (Tasmania licence area), the multiplexes it carries and the channel numbers you should see after a retune. Covers 65 suburbs including Sandy Bay, Kingston, Glenorchy. Main transmitter: VHF only. Some translators in this area use UHF. Data updated 13 July 2026 (ACMA).
Mount Wellington
Reception area Hobart · antenna height 103 m · needs a VHF-only antenna
| Network | RF channel | Centre frequency | Band | Polarisation | Channels (LCN) | More |
|---|---|---|---|---|---|---|
| SBSSBS6 | 6 | 177.5 MHz | VHF | Horizontal |
| - |
| WINTVT7 | 7 | 184.625 MHz | VHF | Horizontal |
| |
| ABCABC8 | 8 | 191.5 MHz | VHF | Horizontal |
| - |
| 7 TasmaniaTNT10 | 10 | 212.5 MHz | VHF | Horizontal |
| |
| 10 TasmaniaTDT11 | 11 | 219.5 MHz | VHF | Horizontal |
|
Suburbs in the Hobart reception area
- Sandy Bay TAS 7005
- Kingston TAS 7050
- Glenorchy TAS 7010
- Howrah TAS 7018
- Claremont TAS 7011
- Blackmans Bay TAS 7052
- New Town TAS 7008
- Lindisfarne TAS 7015
- West Hobart TAS 7000
- Lenah Valley TAS 7008
- New Norfolk TAS 7140
- South Hobart TAS 7004
- Moonah TAS 7009
- Brighton TAS 7030
- Bellerive TAS 7018
- Bridgewater TAS 7030
- West Moonah TAS 7009
- Old Beach TAS 7017
- Margate TAS 7054
- Rokeby TAS 7019
- Sorell TAS 7172
- Hobart TAS 7000
- Midway Point TAS 7171
- Taroona TAS 7053
- Huonville TAS 7109
- Berriedale TAS 7011
- Rosetta TAS 7010
- Mount Nelson TAS 7007
- Warrane TAS 7018
- Dodges Ferry TAS 7173
- Lutana TAS 7009
- North Hobart TAS 7000
- Lauderdale TAS 7021
- Mornington TAS 7018
- Mount Stuart TAS 7000
- Austins Ferry TAS 7011
- Montrose TAS 7010
- Kingston Beach TAS 7050
- Tranmere TAS 7018
- Battery Point TAS 7004
- Chigwell TAS 7011
- Granton TAS 7030
- Dynnyrne TAS 7005
- Richmond TAS 7025
- Seven Mile Beach TAS 7170
- Cambridge TAS 7170
- Snug TAS 7054
- Primrose Sands TAS 7173
- Rose Bay TAS 7015
- Goodwood TAS 7010
- South Arm TAS 7022
- Derwent Park TAS 7009
- Rosny TAS 7018
- Fern Tree TAS 7054
- Montagu Bay TAS 7018
- Collinsvale TAS 7012
- Otago TAS 7017
- Glebe TAS 7000
- Bonnet Hill TAS 7053
- Tinderbox TAS 7054
- Electrona TAS 7054
- Opossum Bay TAS 7023
- Rosny Park TAS 7018
- Clarence TAS 7170
- Lower Sandy Bay TAS 7005
Retune your TV in Hobart
Mount Wellington carries RF 6 (177.5 MHz), 7 (184.625 MHz), 8 (191.5 MHz), 10 (212.5 MHz), 11 (219.5 MHz).
Common questions about TV frequencies
- Why do TV frequencies matter?
- Every free-to-air service in Hobart travels on a multiplex that sits on one RF channel at one centre frequency. Knowing those numbers tells you whether your antenna covers the right band, whether it is aimed at the right transmitter, and which services your TV should find after a tune.
- What is the difference between a full auto-scan and a manual tune?
- An auto-scan sweeps every channel and rebuilds the list from scratch, which is the right choice after a move or a change at the transmitter. A manual tune adds one RF channel at a time and is useful when a single multiplex is missing or when a weak neighbouring transmitter keeps overwriting the strong local one.
- Why do channels go missing?
- Channels usually disappear because the signal level has dropped, not because the broadcaster stopped. Water in the cable, a corroded connector, a failing amplifier, a shifted antenna after a storm, or an old scan holding on to a distant transmitter are the common causes. A fresh scan confirms whether the services are still reaching the antenna.
- Do I need a VHF or UHF antenna?
- It depends on the transmitter. VHF services sit on RF channels 6 to 12 and need a large, wide-element antenna. UHF services sit on channels 28 to 51 and need a smaller, closely spaced array. Where a transmitter uses both bands you need a combined antenna, and the lookup on this page states which one applies.
- What should I do if only one network is missing?
- A single missing network almost always means one multiplex is arriving too weak or is being interfered with. Note the RF channel for that network from the table, retune, and if it still does not appear the antenna or cabling is favouring some frequencies over others and needs checking on site.
- When should I call an installer?
- Call an installer when a retune does not restore the services, when reception breaks up in wet or windy weather, when the antenna is on a steep or two-storey roof, or when several TVs in the house are affected. Those point to the antenna, cabling or distribution rather than the TV.
Still missing channels in Hobart?
Our licensed technicians check the antenna, cabling and signal levels on site.
Source: ACMA licensed broadcasting transmitter data (© Commonwealth of Australia, Creative Commons Attribution licence). Logical channel numbers maintained by site. Population: ABS Census 2021 (CC BY 4.0). Report an error
